Bob Crouse handles egress window installation on Long Island for safer, brighter basements and bedrooms, with every opening sized and installed to meet the requirements that actually matter.
An egress window has to meet specific size, sill height and window well requirements so a person can actually climb out of it in an emergency. Under the residential code New York follows, that generally means about 5.7 square feet of clear opening, a sill no higher than 44 inches off the floor, and a well big enough to stand in and climb out of, with a ladder or steps once it gets deep. Your town building department has the final word on the details. Meeting those numbers means cutting into the foundation, installing proper drainage in the well and sizing the opening correctly, work with real structural and safety consequences if it is done wrong.
Bob Crouse has been installing egress windows across Suffolk County for over 40 years, most often as part of basement renovations where code compliance turns unused space into a real, livable room. It is one of the specialty jobs under our window replacement work, and the same crew sets the unit, builds the well and trims the opening inside.
Drainage is the part that changes most from town to town. On the South Shore, closer to the Great South Bay in places like Islip, groundwater tends to sit higher, so the well drain and the gravel base below it get extra attention. On sandier lots farther east, water drains faster, but the well still needs a cover and a clean drain path so leaves and snowmelt do not pool against the new glass.
Proper sizing and window well drainage are what make an egress window actually function as a safe exit.
The same process every time, so there are no surprises between the first conversation and the final walkthrough.
We evaluate the foundation, grading, and drainage before determining the right approach for the opening.
Excavation, foundation work, and window well details are explained and priced honestly upfront.
Foundation cutting, window installation, and window well construction handled by the same crew, start to finish.
The project isn't finished until the window meets code and works exactly as it should.
An egress window is a safety feature before it is a design choice. Bob brings over 40 years of construction experience to the opening, the well and the drainage so they work together long after the trim is up, and he explains each step before the foundation is cut. If you would rather add light and depth to an upstairs room than an exit to a basement, a bay window installation is the better fit.
He has a knack for listening to an idea and absolutely blowing your mind with the level of craftsmanship. Bob Crouse Construction will always be the company I recommend.
If you're finishing a basement or adding a bedroom below grade, an egress window is typically required for code compliance and for the space to legally count as livable.
Egress windows have minimum size and sill height requirements so a person can exit through them in an emergency, which regular windows aren't required to meet.
In most cases, yes, since the opening needs to be enlarged to meet code minimums. This is planned and priced as part of the quote.
Yes, egress windows are often scoped together with a full basement renovation since they're frequently required for the space to be considered livable.
Yes, in every township from Islip to the Hamptons and the North Fork. Check the Service Areas page or give us a call.
Call directly, or tell us about your project below and Bob will follow up personally.
Over 40 years of master carpentry and home renovations across Long Island, from Islip to the Hamptons and the North Fork.